10X Molecular Sieve 10X

Molecular sieve is a crystallized aluminosilicate. With homogeneous pore size and high specific surface area, Molecular sieve

Molecular sieveis a crystallized aluminosilicate. With homogeneous pore size and high specific surface area, 

Molecular sieve bears excellent features as follows: For small polarity molecules and unsaturated molecules, the higher degree of saturation and polarity, the stronger selective adsorption is; Strong water absorption. Even under high temperature and low moisture content, Molecular sieve still have very high absorption capacity.

Typical products: 3A,4A,5A,10X,13X and copper sieve etc.

	(g/ml)	A(%)	W(%)
3A	0.60-0.70	19-20	0.3-0.6
4A	0.60-0.70	20-21	0.3-0.6
5A	0.60-0.70	20-21	0.3-0.5
5A-DW	0.45-0.50	21-22	0.3-0.6
10X	0.50-0.60	23-24	0.3-0.6
13X	0.55-0.65	23-24	0.3-0.5
13X-As	0.55-0.65	23-24	0.3-0.5
Cu-13X	0.50-0.60	23-24	0.3-0.5

 Technical Parameter

Item	Unit	Technical data
Shape		Pellet		Sphere
Diameter	mm	1.5-1.7	3.0-3.3	1.7-2.5	3.0-5.0
Size ratio up to grade	%	≥98	≥98	≥98	≥98
Bulk density	g/ml	≥0.65	≥0.65	≥0.70	≥0.70
Wear ratio	%	≤0.20	≤0.25	≤0.10	≤0.10
Crushing strength	N	≥45/cm	≥60/cm	≥30/p	≥70/p
Static water adsorption	%	≥20	≥20	≥20	≥20
Ethylene adsorption	%	≤3.0	≤3.0	≤3.0	≤3.0
Water content, as shipped	%	≤1.5	≤1.5	≤1.5	≤1.5

Typical Application 1) Drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadien) 2) Cracked Gas Drying3) Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required. 4) Drying of highly polar compounds, such as methanol and ethanol5) Drying of liquid alcohol

6) Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas-filled.7) Drying of refrigerants

 RegenerationMolecular sieve Type 3A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C.The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

AttentionTo avoid damp and pre-adsorption of organic before running, or must to be reactivated.

10X Molecular Sieve 10X